Pro-Audio Acoustic Panels
HI-END Acoustic Panels
Architecture & Engineering Acoustic Panels

Artnovion Acoustic Panels

Alps Hi-End Diffuser Acoustic Panels
Alps W Diffuser is an attractive, furniture grade wooden QRD diffuser, designed for mid-high frequency sound diffusion with a range of 250 Hz up to 4000 Hz. Developed specifically to interrupt discrete echoes by scattering or diffusing sound energy over a wide area without removing it from the room, Alps W Diffuser improves sound and speech clarity. With an easy installation procedure, Alps W Diffuser is available in both hard and soft woods and in a wide variety of finishes including wood veneer, laminates, melamine coating and painted surfaces, such as our limited edition (Gold Version).
Jaya Hi-End Diffuser Acoustic Panels
Jaya W Diffuser is a product with an exquisite design, aiming to reach maximum high frequency diffusion. This handmade elliptic panel was designed to give you maximum efficiency in every way, particularly at high frequencies. The scattering of this panel begins at 800 Hz and offers effective and even diffusion up to 6000 Hz. This premium product is available in a wood finish or in lacquered colours, making it ideal to be used on the front, back or side walls of your room, as well as ceilings.
Dawson DIMI Hi-End Absorber Acoustic Panels
Dawson Dimi Absorber is an elegant premium acoustic treatment. Artnovion's Dimi range was designed for adaptability. Allowing a new scope of designs and space management. Perfect for treating sound reflections and excessive reverberation. Manufactured with premium materials and carefully wrapped with acoustic fabric, this product has an outstanding performance from mid to high frequencies.Available in standard market furniture grade fire rate, appropriate for home use applications, compliant with all domestic level fire grades; and Fire Rate + fire resistance, compliant with entry-level fire resistance, certified under specific European and American regulations. Available in 7 standard colours, plus customised colours on demand.
Sahara Hi-End Absorber Acoustic Panels
Sahara panels are the forerunners of the next generation of acoustic panels. Completely adaptable. Completely customizable. Unique for each environment. A good acoustic treatment lies in the correct ratio between absorption and diffusion. Sahara can regulate both, without changing its seamless organic pattern, allowing you to fully embrace the architectural style of your space without worrying about different panel placement.
Loa Square Hi-End Absorber Acoustic Panels
Loa Square is a fabric covered absorber, with a usable range of 350 Hz up to 4000 Hz. Its squared design is perfect for a scattered pattern, or incorporating and complementing other aspects of your room decor, whilst supplying effective sound absorption. Ideal to reduce unwanted acoustical reflections, and to tame chaotic reverberation in your space, Loa Square is easy to install on both walls and ceilings and is available in 10 different fabric choices.
Komodo W Hi-End Bass Trap Acoustic Panels
To fill the gap in the low frequencies treatment that usually become problematic in smaller rooms, Artnovion developed Komodo Bass Trap. With a absorption effect from 75 Hz to 125 Hz, the Komodo Bass Trap offers an enriched acoustic experience, helping reduce directly standing sound waves and their reflections. With a wooden finish, Komodo Bass Trap can create various artistic patterns when mounted on the side or back walls of your home cinema or living room.
Eiger Hi-End Bass Trap HP Acoustic Panels
Usually the most noticeable problems in a recording or post-production studio are caused by low frequencies, and are often overlooked in traditional acoustic treatments. Eiger is a high performance Bass Trap, carefully developed by our R&D department to treat low frequencies. With its classic and delicate design Eiger is ideal for Home Cinemas and Hi-Fi rooms. Craft truly unique ambiences with this symbiosis of acoustic performance and design.
Lugano Hi-End Diffuser Acoustic Panels
Lugano Diffuser provides diffusion over any bandwidth, given the precise width and depth of the integrated surface treatment. The scattering begins at 350 Hz and goes up to 4000 Hz. Usable for all noise control, but above all for musical applications, Lugano is a high quality and high performance solution for Hi Fi and Home Cinemas. With a furniture grade quality and available in several woods and finishes, Lugano Diffuser is an aesthetically pleasing addition to any space.
Arvon Hi-End Diffuser Acoustic Panels
Arvon W Diffuser begins scattering at 900 Hz and goes up to 6000 Hz, providing a more uniform sound field through mid and high frequency diffusion. Made of wood from a sustainable source, and available in 4 colours, Arvon has a furniture grade quality, becoming an exquisite diffuser that will fit nicely in your home cinema or living room. Optimised through an Artnovion patented technique, you can carry 2 units per box by clicking them into each other, and fitting them together as a single unit.
Azteka W Pro-Audio Absorber Acoustic Panels
Azteka acoustic panels were designed to reduce standing waves and preventing them from filtering, drastically improving speech clarity. Azteka's performance begins at 315 Hz and offers effective and even absorption up to 3150 Hz. Azteka is an impressive combination of unique Artnovion acoustic design with high performance acoustical cores. Azteka panels can be effortlessly installed on walls or ceilings.
Thames Pro-Audio Absorber Acoustic Panels
Thames W - Absorber was designed specifically for the broadcast market. This large scale panel is perfect for wall-to-wall, high quality sound absorption, used to create high-fidelity recording and listening environments. Developed around our FixArt Tube mechanical installation system, the panels is fully decoupled from it's mounting surface, increasing it's efficiency not only from the resulting air gap, but also in stopping structural vibration that can be problematic in multiple use recording studios. It's installation system drastically simples studio design, with an accessible cavity allowing for cabling, or surface mounted amenities. Available in a selection of high quality lacquered and wood finishes. Thames is the future of studio design.
Logan Pro-Audio Diffuser Acoustic Panels
Logan Diffuser provides diffusion over any bandwidth, given the precise width and depth of the integrated surface treatment. The scattering begins at 400 Hz and goes up to 4000 Hz. Usable for all noise control, but above all for musical applications, Logan is a high quality and high performance solution for broadcasting, recording or post production studios, and music practice rooms. With a furniture grade quality and available in several woods and finishes, Logan Diffuser is an aesthetically pleasing addition to any space.
Artnovion . The Collection
Artnovion . Impulso App
Artnovion . The Story behind the brand
CEDIA 2015: Artnovion Features Its Architectural Panels and Audio Diffusers

Impulso Acoustic Applications
High Accuracy Acoustic App Engineered by Artnovion

ก้าวล้ำนำสมัยไปกับอะคูซิคแอพพลิเคชั่นโดยเฉพาะ คุณจะไม่พลาดในสิ่งที่ถูกต้อง แม่นยำ ของระบบอะคูซทิคในห้องของท่าน

Easy To Use

แอพพลิเคชั่น ใช้งานง่าย ท่านสามารถปรับแต่แก้ไข ได้ตามที่ท่านต้องการ

NEW ATC POWER-AMPLIFIER

ATC P2 HI-END Power-amplifier

Generating twice the power of its smaller P1 sibling, the P2 will drive the most challenging loudspeakers with ATC’s signature virtues of wide bandwidth and ultra-low distortion…
Hand-built by ATC in the UK, the P2 class A/B stereo power amplifier is designed to complement the brand’s range of hi-fi preamplifiers, both aesthetically and operationally. Rated at 300W continuous power per channel and developed in tandem with the P2 Pro studio amplifier, the ATC P2 is a Dual Mono design, keeping the power supplies, signal and return paths discreet. This approach ensures that the amplifier will achieve the maximum signal separation with minimal crosstalk, and that intermodulation between channels via the power supplies is reduced to an absolute minimum across a frequency range of 400kHz. It also means that the power delivery from one channel cannot affect the specified power available from the other.

Within a new low-vibration chassis design featuring a precision machined 12.7mm brushed aluminium front panel, the P2’s layout includes a massive, custom-made 400 VA low-noise transformer for each channel and an output stage involving 3 pairs of MOSFET devices per channel to achieve peak current output of over 15 amps. ATC’s unique “grounded source” output stage ensures smooth power delivery and extremely low harmonic distortion. The gain of the P2 matches that of the lower power P1 (150W/ch) so that they can be used together in bi-amp or tri-amp systems, connected via the amplifier ‘Link’ phono inputs/outputs.

The ATC P2 offers balanced XLR and unbalanced phono inputs, ‘link’ phono outputs, proprietary 4mm speaker terminals, and IR remote control.
Features
-Latest ATC discrete MOSFET grounded source output stage.
-Class A/B topology.
-300W into 8 ohm continuous power O/P capability
-Dual mono-design ensures minimal crosstalk and inter-channel modulation.
-Entirely separate power supplies for high voltage audio, low voltage audio and logic/control.
-400kHz bandwidth to ensure best possible transient reproduction.
-Vanishingly low distortion.
-Custom low noise toroidal transformers.
-New chassis design for reduced vibration and a more striking visual appearance.

ATC P2-PRO AUDIO Power-amplifier

ATC is proud to announce upcoming availability of the P2 PRO Dual Mono Power Amplifier — a true dual mono design, delivering 300W of continuous power simultaneously from both channels to drive the most challenging loudspeaker loads with ATC’s signature virtues of wide bandwidth and ultra-low distortion — as of November 3rd…
Hand-built by ATC in the UK, as implied by name, the Class A/B P2 PRO Dual Mono Power Amplifier is a dual mono design, keeping the power supplies, signal, and return paths discrete. This approach ensures that the amplifier will achieve maximum signal separation with minimal crosstalk, and that intermodulation between channels via the power supplies is reduced to an absolute minimum across a frequency range of 400kHz. It also means that the power delivery from one channel cannot affect the specified power available from the other.

Within a new low-vibration 19-inch rack-mount chassis design featuring a precision machined 12.7mm brushed aluminium front panel, the P2 PRO Dual Mono Power Amplifier’s layout includes a massive, custom-made 400 VA low-noise transformer for each channel and an output stage involving three pairs of MOSFET devices per channel to achieve peak current output of over 15 amps. According to ATC Technical Sales Manager Ben Lilly, “The final design of these transformers is the result of seven design iterations with the goal of achieving best possible audio performance and lowest possible mechanical noise. This was achieved by using a very high-grade steel core which is then vacuum-impregnated with high-temperature resin, post-winding. The exceptionally low levels of mechanical hum/buzz, along with convention cooling, are vital features if the amplifiers are to be used in control rooms designed with lowest possible levels of background noise.”

Needless to say, with ATC’s unique ‘grounded source’ output stage, smooth power delivery and extremely low harmonic distortion is a given. Gain matches that of the P2 PRO Dual Mono Power Amplifier’s lower power P1 PRO Dual Mono Power Amplifier sibling so that they can be used together in passive bi-amp or tri-amp systems connected via ‘Link’ phono inputs/outputs.

The P2 PRO Dual Mono Power Amplifier offers both balanced XLR and unbalanced phono inputs, ‘Link’ phono outputs, proprietary speaker terminals, and a front panel-mounted power switch. Signing off, Ben Lilly lets it be known that this product has been a long time in the making due to two major factors — namely, new power supply design and a new top cover/lid design: “The mains power ‘soft start’ feature has been revised, slowing the rate at which the unit powers up. The design of the venting has also been revised with the steel mesh covering the heatsink vents being replaced by a beautiful acid-etched stainless steel insert. Not only does this component greatly enhance the amplifier visually, it also reduces lid/cover vibration.”

Features
-300W per channel.
-True dual-mono design delivers full power simultaneously from both channels, with minimal crosstalk
-Grounded source class A/B circuit topology as found in ATC’s renowned active loudspeakers.
-Ultra wide bandwidth, low distortion and high dynamic range ensure tonal accuracy and perfectly timed transients.
-No compromise, high performance power supply and large heatsinks guarantee outstanding stability and long term reliability.
-A perfect match for any passive studio reference monitor.
-19” Rack mountable convection cooled chassis
-Hand built in the UK and supported by a 6 year warranty.

ATC Entry Series Now Available In Satin Black And Satin White

SH25-76 Tweeter
Sharing technology with the renowned ATC soft domed mid-range drive unit, the 19AT’s tweeter employs a unique dual suspension system, designed to suppress rocking modes even at high power output levels. The ATC configuration of a short edge-wound voice coil in a long, narrow magnetic gap ensures exceptionally low distortion throughout the tweeter’s operating band and removes the need for ferrofluids, which can dry out over time, compromising performance. A complex-shaped, soft-domed diaphragm extends high frequency range and offers a smooth off-axis response. The tweeter’s 15,000 gauss (1.5 tesla) neodymium magnet has a black heat-treated top plate, which dissipates heat away from the voice coil to maintain high power handling and low power compression. A precision-machined 5.5mm rigid alloy waveguide provides optimum dispersion with a flat on-axis frequency response and resonance-free operation.

Bass Driver
The SCM19AT’s 150mm ATC SL mid/bass driver utilises a carefully weighted doped fabric cone with a 75mm soft dome – exceptional for its broad and even dispersion of mid-band frequencies. The cone is driven by an ‘under-hung’ (short coil/long gap) motor using a huge 9kg ‘Super Linear’ magnet system, which is unique to ATC loudspeaker systems. The 75mm ribbon wire voice coil is meticulously milled and wound in-house by ATC. ATC’s familiar under-hung motor topology maintains linear coil force and inductance, even at high drive levels, keeping distortion low.

Electronics
The 19AT’s proprietary two-way on-board amp pack design has been revised to reduce noise and distortion (a further -10dB @ 10kHz), while achieving a lower operating temperature for improved reliability. The design includes protection circuits for both DC offset and thermal overload. Mid frequency THD is vanishingly low at 93dB/0.002%, and a very wide bandwidth of 200 kHz ensures the accurate reproduction of musical transients. ATC’s Grounded Source output stage modules are fed by a newly developed two-way active crossover section featuring 2nd order modified Butterworth circuitry with phase compensation for each crossover point. The advantage of active crossovers is that their response remains unaffected by variable voice coil impedance, while the use of phase compensation enables phase coherency at the crossover points, improving the SCM19AT’s tonal balance and enhancing imaging for a pin-point stereo field. As usual system input is via balanced XLR.

The ATC SCM19AT – the first active 19 in the Company’s history – is designed for optimum performance with the grille attached, although the difference in performance without the grill is minimal. Finished in anthracite grey, the metal grille fixes to the cabinet via hidden magnets. Designed and manufactured by ATC entirely in-house, the SCM19AT offers the ownership of a hand-built ruggedly engineered speaker system, world famous for musical accuracy and high power output. Like all ATC products, the SCM19AT is backed by a six-year warranty.


Specification
Drivers: HF ATC 25mm dual suspension Tweeter, Mid/LF ATC 150mm SL
Matched Response: +/- 0.5dB
Frequency Response (-6dB): 54Hz-22kHz
Dispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical
Max SPL: 108dB
Crossover Frequency: 2.5kHz
Connectors: Male XLR
Input sensitivity: 1V
Filters: 2nd Order critically damped with phase compensation
Overload Protection: Active FET momentary gain reduction
Fault Protection: DC fault protection and thermal trip. Fault indication on rear panel mounted LED
Amplifier Output: 150W LF, 32W HF
Cabinet Dimensions (HxWxD): 980x370x344mm (spikes add 25mm to height, grill adds 34mm to depth)
Weight: 31kg/68.2lbs.

The SCM19AT system is an active version of the Company’s SCM19 award-winner, uniting proprietary, optimised driver/amp pairings in a slender floor standing design…

ATC Loudspeaker Technology’s new SCM19 Active Tower speaker system will deliver the company’s reference-quality audio from an elegantly curved floor-standing design, just 370mm wide and under a metre in height. Identical acoustically to ATC’s award-winning passive SCM19 2-way system but utilising the 19 litre volume in a slim tower format, the SCM19AT combines high aesthetic appeal with the widely acknowledged performance benefits of ATC active design to create a compelling speaker proposition for music lovers.

The SCM19AT’s braced, sealed and curved multi-layer laminated cabinet, which is precision-finished in cherry or black ash real-wood veneer, provides a rigid and optimally damped environment for the Company’s acclaimed SH25-76 soft dome tweeter and 150mm Super-Linear mid/bass driver. Drive units are individually powered by an upgraded bi-amp pack (also proprietary), comprising ATC’s discrete MOSFET Class A/B modules, providing 32W of continuous power to the HF section and 150W to the bass.


Features
-New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide
-“SL” spec bass driver with 75mm integral Soft Dome
-9kg optimised short-coil/long gap motor assembly
-On-board grounded source 182 watt Class A/B Bi-amplifier
-Active filters and overload protection
-6 year warranty

The advantages of active operation:
-Perfectly matched dedicated amplifiers for each frequency band
-Active crossover filters with phase correction ensure accurate timbre, excellent imaging and source location
-A flat magnitude response that is not changed with power input level
-A 20dB improvement in intermodulation distortion
-Better controlled low frequency
-A greater dynamic range for the same input power
-Price: please contact the local authorised ATC dealer or distributor in your region for pricing.
-Availability: 23rd March 2016

AXIOS

Headphone Cable

The first products that Kimber Kable designed were the braided 8 wire (4PR) and 16 wire (8PR) speaker cables. The AXIOS headphone cable follows this classic Kimber Kable braided design, revisited for high resolution headphones. The cable utilizes a very flexible OFHC copper wire braid comprised of 16 FEP insulated 24 gauge stranded conductors. We developed a new precision hand-braided process which allows the conductors to seamlessly separate from 16 wires to 8 wires within the transition, eliminating the need for a solder joint. Each connector is finished with hand-polished hardwoods to match the beauty of your headphones.
Hi-Fi Racks
Hi Fi Racks is a family run business based in the heart of rural England. Established in 2007 as a one-man operation by Managing Director, Bradley Walters, the business has gone from strength to strength ever since. We now occupy a manafacturinng workshop in Burrough on the hill, that's staffed by a committed and passionate team of skilled craftsmen.
Hi-Fi Racks (Podium Reference)
One of our most popular products, the multi accolade and award-winning Podium Reference is a four-legged hi fi rack constructed from your choice of solid hardwood. The sturdy 40mm plinths provide stiffness and stability, with each standard 595mm wide plinth weighing more than 10kg - adding to the rack's density as well as absorbing vibration.
Speaker Stands (Podium T5 III: 3 Leg)
The three-legged Podium T5 III is an attractive product that boasts superb acoustic performance. As you'd expect, it goes especially well with the three-legged Podium Trios rack, but looks just as good with our other products. Like our hi fi racks and TV stands, the T5 III is manafactured with a choice of 5 solid hardwoods (Oak, Walnut, Mahogany, Cherry, Maple) and the Oak can also be finished in black or white.
AV Racks - Podium XL (V)
The Podium XL (V) is the perfect choice for the larger room or for displaying bigger, heavier AV equipment. Apart from the fifth solid hardwood leg that gives it its name, it shares most of its other features with the Podium XL rack, including its sturdy 40mm solid oak plinths. However, it's available in larger sizes than the XL, making it the biggest standard-sized rack that we produce.
Podium Storage
The Podium Storage is the perfect scalable storage solution - it's been specially designed to accommodate and adapt to any size and type of audio visual collection. Different shelf depths are available to fit LPs, CDs and DVDs/Blu-Rays. You can choose any combination of these to create multiple configurations - adding in new shelves as your requirements change over time.